Is there anybody here who can tell me if i wanna put marble tiles on all over my roof how much it cost me?.I have 6 marla double story house in islamabad.
Contect with me i will give you lowest rate
03348203311
Marble starts from 40 per sqft to 800 per sqft. Which one you have in mind will determine the cost
HT Sir…I have been disturbing you for a while but your opinion is always very helpful for us for which i am very thankful…Sir i wanted to know a bit about wood estimate as what is the total amount needed for a 1 kanal house with 30 doors in order to have solid diyar wood work…Secondly how much wood in cubic feet would be needed for whole work. How about ash wood and what are the rates of ash wood and diyar these days…
Regards.
Marble rate (which you like)* Area of your roof (square feet) * labor charges and material
on roof sunny grey , badal is enough its not too much cost. Now multiply all above instruction with each others
Regards
Faheam
Roots Engineering Services
00923217867889 whats up as well
Sorry for delayed response @Saadi
I dont have much knowledge when it comes to wood measurements it is because the guy i have is very good. If you need his contact details than let me know.
He can visit your site and give you all the estimates. The best option is to buy wood your self and give it on labor rate.
Sir so nice of you as u always remain really helpful and knowledgeable.
Sir can i know the rate of diyar and ash wood if you are updated.
Regards
Diyar 1st quality should be around 4200 4500 nellam wali… And ash wood 3400 good quality available in pindora.
So nice of you sir…
These rates will require further bargaining. Which ever carpanter you choose tell him the less wastage will get you a bonus and more wastage will be fined to your final payment and get matwrial estimates from few carpanters than finally ask the choosen carpenter for an estimate. This will help in less wastage of material and cost
The best posters/members in Zameen.com are Malik BR and HT.(atleast they are my fav) @HT Always nice to read your informative posts. JazakAllah brother.
Thanks malik bhai. I appreciate your comments but BR malik has an expierence of a life time. MASHALLAH.
HT Sir…JazakAllah
Wood required for full Solid Door 7' x 3.25' = 4 cubic ft
Wood required for Border/Architrave and Jamb frame = 1 cubic ft
Wood required for full Solid Door 8' x 3.25' = 5 cubic ft
Wood required for Border/Architrave and Jamb frame = 1.25 cubic ft
Wood required for semi Solid Door 7' x 3.25' = 2 cubic ft
Wood required for Border/Architrave and Jamb frame = 1 cubic ft
Wood required for semi Solid Door 8' x 3.25' = 2.5 cubic ft
Wood required for Border/Architrave and Jamb frame = 1.25 cubic ft