IN THIS POST
– Standard Shower Curtain Sizes
– Measuring Shower Curtain Width
– Measuring Shower Curtain Length
– Where to Install the Curtain Rod
Curtains for the shower not only help keep your bathroom dry by preventing water from splashing onto the floor but also add a hint of colour to an otherwise dull décor. Replacing these curtains is also a budget-friendly way to spruce up your bathroom without much hassle. However, when it comes to replacing them, a lot of homeowners choose to buy standard shower curtain sizes for their bathrooms. In most cases, these sizes work fine. However, since the dimensions of each bathroom are different from the other, the ‘one size fits all’ concept does not always work.
Choosing the correct shower curtain size for your bathroom is more important than you may realise. If these curtains are too long, they will result in the buildup of mould and mildew. On the other hand, if they are too short, they won’t be able to protect your floor from water damage.
Therefore, if you are planning to buy curtains for the shower, you must measure your bathroom correctly to make sure you purchase the perfect fit. Here is a complete guide on measuring the size of shower curtains that will help you choose the best and most practical option for your home.
Let’s get started.
Standard Shower Curtain Sizes
There are different types of shower curtains available in the market. However, there are only three standard shower curtain sizes for bathrooms with bathtubs:
- 70×70 inches
- 70×72 inches
- 72×72 inches
These are considered the standard shower curtain sizes because most bathtubs are around 58 to 60 inches wide. The manufacturers incorporate an additional 12 inches of fabric to their width to make sure the curtain has adequate folds and provide complete coverage when pulled shut.
Meanwhile, the shower stall curtains available in the market have the dimensions of 50 inches by 78 inches.
Needless to say, these standard shower curtain sizes are not always a good fit. If you have a larger bathtub or a smaller shower stall, these curtains may not be a suitable option for your bathroom.
How to Measure the Shower Curtain Width
The ideal width for shower curtains is the width of the bathtub or shower stall plus 12 inches to ensure there is enough fabric to reach the walls on either side. For example, if your shower stall is about 50 inches wide, you should buy a 62-inch-wide curtain to protect your bathroom from mildew and moisture.
If you are confused about the size of your shower, you can simply measure the length of your shower curtain rod and incorporate an extra 12 inches to its size.
Ideal Width for Shower Curtains: Shower Width + 12 inches
How to Measure the Shower Curtain Length
The standard shower curtain height is 72 inches, but it may not work for all bathrooms.
It is essential to point out that bathroom curtains should never be long enough to touch the floor. Although a lot of people don’t realise this, extra-long shower curtains can be responsible for mould and mildew buildup in the bathroom by trapping the moisture between the fabric creases and the floor. They are also a tripping hazard, especially for little kids. In addition to that, installing extra tall shower curtains can make it difficult for you to clean the bathroom floor properly.
To determine the correct length for your shower curtains, measure the area between the floor and your shower curtain rod. Then, subtract 2 inches from the total height to make sure the fabric doesn’t pool on the floor. Shower hooks can also add to the length of your curtains. Therefore, if the rod comes with curtain hooks, you must also take their size into consideration while purchasing shower curtains.
Ideal Length for Shower Curtains: Height of Shower Curtain Rod – 2 inches
Where to Install the Shower Curtain Rod
Unlike the standard shower curtain sizes, there is no standard height for installing a curtain rod. However, the ideal height of showers rods in bathrooms is between 75 and 77 inches from the floor.
Furthermore, an average shower curtain rod diameter is approximately 1.38 inch.
Ideal Height for Shower Rod: Hook Size + Shower Curtain Length – 2 inches
Most experts recommend buying curtains for the shower before installing the rod. Since the shower curtain sizes may vary slightly, it is crucial to measure them before deciding where to drill holes to mount the brackets for the rod. Moreover, it is advised to use a tension rod to find the perfect height before installing permanent brackets. Once you have adjusted the tension rod to determine the ideal height, mark both walls and use a drill to attach the brackets.
This brings an end to our guide on shower curtain sizes. If you have any questions or feedback regarding the topic, please get in touch with us by emailing at blog@zameen.com.
Meanwhile, don’t forget to check out our comprehensive guide on slip-resistant bathroom flooring ideas find the best option for your space. In addition to that, if you are in the process of renovating or remodelling your bathroom, here are some tips on choosing between a bathtub and a shower cabin that might come in handy.
For more information on where to buy shower curtains in Pakistan, stay connected to Zameen Blog – the leading home décor and property blog in Pakistan. You can also subscribe to the Zameen Newsletter and Facebook page to learn about the latest construction and real estate trends in the country.
